Access/Start Authorization Control Module (J518), Coding

Access/Start Authorization Control Module (J518), Coding

Special tools, testers and auxiliary items required

• Vehicle diagnostic tester

The access/start authorization system must be coded after the access/start authorization control module has been replaced.

Procedure

- Connect the (Vehicle diagnostic tester).

- Select Guided Fault Finding.

- Using the Sprung button, select "Functions/Component selection" and the following menu options in the following sequence:

• Body

• Body repair procedures

• 01 - On Board Diagnostic (OBD) capable systems

• 05 - Access/start authorization

• Access/start authorization functions

• Control module, coding