Windshield Washer Spray Nozzle: Service and Repair

Windshield Spray Nozzles






Removing

- Push nozzle upward - arrow A - and pull out of flap at bottom - arrow B -.

- Release and disconnect the hose - 1 - from the spray nozzle and disconnect the nozzle heater connector - 2 -.






Installing

- Connect harness connector and hose to washer nozzle.

- Slide spray nozzle into installation opening until it engages audibly.

- Adjust the spray nozzles. Refer to => [ Windshield Spray Nozzles, Adjusting ] Windshield Spray Nozzles, Adjusting.