Wiper Arms

Wiper Arms

Removing





- Pry off covers - arrows - using a screwdriver.

- Remove the mounting nut - arrows -.

- Slide the arms of the puller (T10369/1) - 2 - under the wiper arm - 4 - as shown in the illustration.





CAUTION!
The windshield wiper shaft can be damaged.

Always use the thrust piece - 3 - to loosen the wiper arm.

- Turn the pressure bolt - 1 - on the puller clockwise until the thrust piece - 3 - makes contact with the wiper shaft. Using a 6 mm socket head wrench, rotate the pressure bolt - 1 - on the puller clockwise until the wiper arm - 4 - is released from the shaft.

- Remove the puller and the wiper arm.