Function 07 - Data Bus On Board Diagnostic Interface Coding, From 10.00

Function 07 - Data Bus On Board Diagnostic Interface Coding, from 10.00

- Connect scan tool (VAG 1551) , input address word 19 "Gateway" and then press button until " Select function XX" is shown in display.

- Press buttons 0 and 7 to select function " Code control module".

Indicated on display:

Rapid data transfer Q
07 - Code control unit

- Press Q button to confirm input.

Coding

Indicate on display:

Code control module
Enter code number XXXXX (0-32000)

- Enter code number compiled from code table.





• Transmission control module message is not codified because it is automatically learned.