Steering Column Combination Switch (E595), Valeo

Steering Column Combination Switch (E595), Valeo


The removal and installation of individual steering column switch components must be done in a specified sequence. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Removal

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronic systems control module (J527).






- Open the tabs - arrows - and remove the complete steering column combination switch (E595) from the steering column switch base carrier.

Installation

- Slide the steering column combination switch into the guides on the steering column switch base carrier until it latches secure.

Further installation is in the reverse sequence to removal.