Diagnostic Mode 9: Vehicle Information

Diagnostic mode 9: Vehicle information

Function
In this diagnostic mode, vehicle specific diagnostic data such as e.g. the control module versions will be displayed.

Requirement
- There must not be any DTCs stored in DTC memory, Diagnostic mode 3: Check DTC memory.

Work procedure
- Connect diagnostic tester. Diagnostic Tester, Connecting
- Switch ignition on.
- Under address word 33, select "Diagnostic mode 9: vehicle information".
- Select desired vehicle information "Test-ID XX".

Display vehicle information

Test-ID Diagnostic text
04 Calibration identification e.g.:
- 07D906018AQ 4997Engine Control Module (ECM) identification
- 3B0927156T 2222 Transmission Control Module (TCM) identification (only for vehicles with automatic transmission)
06 CVN (check sum) e.g.:
- 61C5ED44Engine Control Module (ECM)
- 0001B688Transmission Control Module (TCM)
- No results
the check sum is different for every control module version

- End diagnostic and switch ignition off.