Registration of the Ignition Key

Registration of the Ignition Key

To finish the registration of the ignition key, the transponder code memorized in the transponder built in the ignition key has to be registered with ECM. To register the transponder code with ECM, perform "Immobilizer Key Registration" mode of SUZUKI scan tool referring to "SUZUKI SDT Immobilizer Control System Operator's Manual".

NOTE:

- A maximum of four transponder codes can be registered with ECM.
- At an early part of the registration process, all transponder codes of the ignition keys in use already registered with ECM are cleared. Therefore, before starting the registration, prepare all ignition keys in use in addition to the new ignition key(s) to be registered with ECM.