DTC Clearance

DTC Clearance

1) Confirm that ignition mode of keyless push start system is in "OFF".
2) Connect SUZUKI scan tool to DLC (1) located on underside of instrument panel.
Special Tool

(A): SUZUKI scan tool (SUZUKI-SDT)





3) Push engine switch to change ignition mode to "ON".
4) Erase DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operator's manual for further details.
5) Push engine switch to change ignition mode to "OFF" and disconnect SUZUKI scan tool from DLC, after completing check.