Instrument Cluster / Carrier: Service and Repair

Combination Meter Removal and Installation

Removal

1) Disconnect negative (-) cable at battery.
2) Remove dash side trim (1) and steering column hole cover (2).






3) Remove center ventilation louver with garnish referring to Center Ventilation Louver Removal and Installation Center Ventilation Louver Removal and Installation.
4) Remove combination meter cluster panel (1) pulling it in arrow direction shown in figure.





5) Remove screws (1) fastening combination meter.
6) Remove combination meter (2) pulling it arrow direction as shown.






Installation

Reverse removal procedure.