P0011

DTC P0011 / P0012

DTC Detecting Condition and Trouble Area






Wiring Diagram

Wiring Diagram:

DTC Confirmation Procedure

WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out by 2 persons, a driver and a tester, on a level road.

NOTE: If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.

1. Warm up engine to normal operating temperature.
2. Accelerate vehicle to 80 km/h (50 mile/h) or more.

DTC Troubleshooting

Step 1-3:

Step 4-11: