P2138

DTC P2138

DTC Detecting Condition and Trouble Area






Circuit Diagram

Circuit Diagram:

DTC Confirmation Procedure

NOTE:
Confirm that the following conditions are met in this "DTC Confirmation Procedure".
- Battery voltage >= 11 V

1. Push engine switch to change ignition mode to "ON".
2. Keep accelerator pedal at fully depressed position for 2 sec.
3. Keep accelerator pedal at release position for 2 sec.
4. Repeat Step 2) through 3) for 3 times.

DTC Troubleshooting

Step 1-3: