P0717

DTC P0717: Input Speed Sensor "A" Circuit No Signal

Wiring Diagram








DTC Detecting Condition and Trouble Area





DTC Confirmation Procedure

WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and tester, on a level road.

1. Clear DTC.
2. Shift select lever to "D" range and drive vehicle at 70 km/h (44 mile/h) or more vehicle at least for 30 seconds.
3. Stop vehicle and check DTC.

DTC Troubleshooting

Step 1-2:

Step 3-4: