P2764
DTC P2764: Torque Converter Clutch Pressure Control Solenoid Control Circuit LowWiring Diagram
Refer to DTC P2763: Torque Converter Clutch Pressure Control Solenoid Control Circuit High. P2763
DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.
1. Clear DTC.
2. Start engine and warm it up to normal operating temperature.
3. Drive vehicle with 3rd or 4th gear in "D" range and lock-up ON for 10 seconds or longer referring to Automatic Gear Shift Table. Automatic Gear Shift Table (Reference: less than 20% throttle opening and at vehicle speed of 80 km/h (50 mile/h) or more)
4. Decrease vehicle speed gradually and stop vehicle.
5. Check DTC.
DTC Troubleshooting
Step 1-2:
Step 1-3:
