LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 L4-2.5L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Side Panel Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Side Panel Removal/Installation




SIDE PANEL REMOVAL/INSTALLATION

1. Insert a tape-wrapped fastener remover into the position indicated by the arrow in the figure.

2. Pull the side panel in the direction of the arrow shown in the figure, then remove the clips and hook.






3. Pull the side panel in the direction of the arrow shown in the figure, while detaching the guides.






CAUTION:
- When pulling out the side panel, be careful not to damage the guide.

4. Install in the reverse order of removal.

scientia non olet · About LEMON Manuals