Front Bumper Reinforcement: Service and Repair

FRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Front bumper Front Bumper Removal/Installation

b. Front combination light Front Combination Light Removal/Installation

c. Aerodynamic under cover No.1 Aerodynamic Under Cover No.1 Removal/Installation

d. Front energy-absorbing form Energy-Absorbing Form Removal/Installation

e. Seal plate Seal Plate Removal/Installation

f. Ambient temperature sensor Ambient Temperature Sensor Removal/Installation [Full-Auto Air Conditioner] Ambient Temperature Sensor Removal/Installation [Manual Air Conditioner]

3. Remove the bolts A and bolts B.






4. Remove the nut C and bolt D.






5. Remove the bolts E.






6. Remove the front bumper reinforcement.

7. Install in the reverse order of removal.