Entertainment System Control Panel: Service and Repair

Rear Passenger Entertainment Control Panel

Removal
1 Remove the register. For additional information, refer to Register Register




2 Remove the rear floor register.
- Release the 4 clips.




3 Disconnect the 6 electrical connectors.




4 Remove the floor console rear trim panel.
- Remove the 4 screws.




5
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the rear passenger entertainment control panel.
- Remove the 3 screws.

Installation
1 Install the rear passenger entertainment control panel.
- Install the screws and tighten to 1 Nm (1lb.ft).
2 Install the floor console rear trim panel.
- Install the screws and tighten to 2 Nm (2 lb.ft).
3 Connect the 6 electrical connectors.
4 Install the rear floor register.
- Secure the 4 clips.
5 Install the register. For additional information, refer to Register Register