LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit L4-1.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Connecting Rod >> Testing and Inspection >> Connecting Rod Bolt Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connecting Rod Bolt Inspection




Connecting Rod Bolt Inspection

1. Measure the diameter of each connecting rod bolt at point A and point B with a micrometer.





2. Calculate the difference in diameter between point A and point B.

Point A-Point B = Difference in Diameter

Difference in Diameter





3. If the difference in diameter is out of tolerance, replace the connecting rod bolt.

scientia non olet · About LEMON Manuals