LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> Element 4WD L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Testing and Inspection >> Keyless Receiver Unit Input Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Keyless Receiver Unit Input Test




Keyless Receiver Unit Input Test

1. Remove the driver's dashboard lower cover. Drivers Dashboard Lower Cover Removal/Installation






2. Disconnect the 5P connector (A) from the keyless receiver unit (B).

3. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

- If the terminals look OK, go to step 4.

4. Reconnect the connector, and do these input tests at the following connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.

- If all the input tests prove OK, go to step 5.





5. Disconnect the connector, and do this input test at the following connector.
- If the test indicates a problem, find and correct the cause, then recheck the system.

- If the input test proves OK, replace the keyless receiver unit.









scientia non olet · About LEMON Manuals