Test AA: Easy Exit/Easy Entry Is Inoperative/Does Not Operate Correctly

PINPOINT TEST AA: EASY EXIT/EASY ENTRY IS INOPERATIVE/DOES NOT OPERATE CORRECTLY

Normal Operation
The driver seat module (DSM) receives a key out command over the medium-speed controller area network (MS-CAN) communication network and powers the driver seat rearward about 51 mm (2 in).

This pinpoint test is intended to diagnose the following:
- Easy entry/exit feature is not enabled
- Missing status information (controller area network [CAN] communication bus messages) to the DSM:
- ignition switch status
- gear selector position

- Wiring, terminals or connectors
- Faulty key-in-ignition warning switch
- Faulty DSM

AA1-AA4: