Intake Manifold: Specifications

Intake Manifold

Important: Tighten the intake manifold bolts in a circular pattern starting at the center (long bolts) and moving outward.

Brace Bolt - Engine Front Cover M12 65 Nm (48 ft. lbs.)
Brace Bolt/Ball Stud - Intake Manifold M6 10 Nm (89 inch lbs.)
Upper-to-Cylinder Head Bolt - Long 23 Nm (17 ft. lbs.)
Upper-to-Cylinder Head Bolt - Short 23 Nm (17 ft. lbs.)
Upper-to-Lower Intake Manifold Bolt 23 Nm (17 ft. lbs.)

Throttle Body Bolt 10 Nm (89 inch lbs.)