Lock Cylinder, Removing And Installing: Installing
WARNING: This page is about a different car, the 2025 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Push the lock cylinder housing -1- at a right angle into the mounting bracket -3- -direction of arrow a-.
-- Install the bolts -4- in the mounting bracket. The locking mechanism -6- pulls at the same time automatically into position -direction of arrow b-.
The door handle -2- swings automatically on to door.
NOTE:
The lock cylinder housing must be pressed onto the outer door panel while installing.
Install in reverse order of removal.:
- Always perform a function test with the door open.