Torque-Splitter: Heat Entry, Read Out
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Only applies to Audi RS3.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure:
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Under Service Procedures > General Procedures and select the menu item Rear Final Drive Energy Entry, Checking .
-- Further follow the program sequence and read out the energy entry.
-- Further follow the instructions in the program.