Work Sample
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A work sample must be created and checked to guarantee and for verification of a correct bond. The result of this work sample must be documented in the adhesive report. The creation of the work sample is described in the processing instructions of the adhesive.
- With a negative result of the working sample (no correct hardening), no correct bonding can be ensured.
- In this case measures must be taken to ensure correct hardening, consult the adhesive supervisor or repeat the adhesion if necessary.
Check and evaluate the hardening of the work sample -1- after reaching assembling stability by breaking the sample -arrow-. The adhesive must break and contain no liquid or soft components.
- Document the test results in the adhesive reports.