Section 66 (General, Technical Data (General Information - Paint))
WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- 00 General, Technical Data
- Safety Precautions And Repair Information
- Safety Precautions
- General Information
- Factory Paint Structure
- Layer Thicknesses
- Structure Of Normal Paint, Conventional
- Structure Of Normal Paint, Water-Based Paint
- Structure Of A Metallic And Pearl Color Paint System, Water-Based Paint
- Structure Of Two Layer Finishes, Conventional
- Structure Of A 2010 Paint Process Paint System, Water-Based Paint
- Structure Of Three Layer Paint, Water-Based Paint
- Customer Service Paint, Paint Structure
- Fundamental Procedure When Processing Areas Sanded Through To Base Surface, Bare Metal
- Reduced Paint Structure In Engine Compartment And Inner Hood
- Repair Instructions For Underbody And Stone Chip Protection
- Window Glass Flange Instruction
- Adhesive Surface Pretreatment When Replacing Laser-Soldered Roofs
- Fender Corrosion Repair Measures, In Wheel Housing Liner Contact Area
- Fold Corrosion Servicing Notes
- Corrosion Protection For Body, Attached And Welded Parts
- Parking Aid Sensor Paint
- Adaptive Cruise Control (Acc)
- Bumper Cover Painting Instructions In Lane Change Assistance Control Module And Front Corner Radar Area
- Painting, Vehicles With Natural Gas Drive (Not For North AMERICA Market)
- High-Voltage Vehicles, Painting
- Paint Levels, SYSTEMATICS
- Paint Layers - Overview And Steps
- Factory Paint Structure
- Original Products