Overview - Transmission Fluid Circuit
WARNING: This page is about a different car, the 2025 Audi S3 and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bleeder Cap
- O-Rings
- Replace
- Bolt
- 20 Nm
- Transmission Fluid Cooler
- Removing and Installing. Refer to TRANSMISSION FLUID COOLER, REMOVING AND INSTALLING .
- Transmission
- Removing and Installing. Refer to TRANSMISSION, REMOVING AND INSTALLING .
- Bolt
- Always replace after removing
- M6x30: 8 Nm +45°
- M6x25: 8 Nm +90°
- Engine for Transmission Fluid Auxiliary Hydraulic Pump 1 -V475-
- Removing and Installing. Refer to ENGINE FOR Transmission Fluid Auxiliary Hydraulic Pump 1 -V475-, REMOVING AND INSTALLING .
- Seal
- Replace
- Transmission Fluid Filter
- Notes for oil change and filter replacement. Refer to GENERAL INFORMATION .
- Removing and Installing. Refer to TRANSMISSION FLUID FILTER, REMOVING AND INSTALLING .
- O-Ring
- Replace
- Coat with gear oil
- Filter Housing
- 50 Nm
- Heat Shield