1. Checking the gear locks / button functions.

WARNING: This page is about a different car, the 2025 Audi S3 and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Test step 1.1

Ignition ON, engine OFF, press "P" position (P button one time), foot brake pressed.

-- Push the selector mechanism control forward (one notch) and release it.

"N" position must be engaged.

"N" position must be displayed on the Selector Lever Transmission Range Display -Y5-.

-- Press the "P" button.

"P" position must be engaged.

"P" position must be displayed on the Selector Lever Transmission Range Display -Y5-.

Test step 1.2

Ignition ON, engine running, "P" position selected, foot brake not pressed.

-- Pull the selector mechanism control toward the rear (one or two notches) and release it.

The selector lever position "P" must remain selected.

Test step 1.3

Ignition ON, engine running, "P" position selected, foot brake pressed.

-- Pull the selector mechanism control toward the rear (one or two notches) and release it.

"D" position must be engaged.

"D" position must be displayed on the Selector Lever Transmission Range Display -Y5-.

-- Pull the selector mechanism control toward the rear (one or two notches) and release it.

"S" position must be engaged.

"S" position must be displayed on the Selector Lever Transmission Range Display -Y5-.

-- Push the selector mechanism control forward (one notch) and release it.

"N" position must be engaged.

"N" position must be displayed on the Selector Lever Transmission Range Display -Y5-.

-- Push the selector mechanism control forward (one notch) and release it.

"R" position must be engaged.

"R" position must be displayed on the Selector Lever Transmission Range Display -Y5-.