Overview - Accelerator Pedal Module

WARNING: This page is about a different car, the 2025 Audi S3, 2025 Audi RS 3, and 2025 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Accelerator Pedal Mechanism

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 6 Nm
Connector
- Make sure it is attached securely
Accelerator Pedal Module -GX2-
- with
  - Accelerator Pedal Position Sensor -G79-
  - Accelerator Pedal Position Sensor 2 -G185-
- Check using the Vehicle diagnostic tester .
- Removing and Installing. Refer to Accelerator Pedal Module -GX2-, REMOVING AND INSTALLING .
- Depending on the engine/transmission combination, an adaptation must be performed after replacing.
- If a corresponding menu item is in the engine electronics tree structure under "functions", perform the adaptation using the Vehicle diagnostic tester .