End Panel, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the end panel -1- in the -direction of the arrow A- on the fender -3-.
-- Press the end panel -1- in the -direction of the arrow B- on the fender -3- until the hook -2- locks.
Requirement
- The lower hook -2- must engage in an angle on the fender -4-.
Further installation is performed in reverse order of the removal.