Removable Trailer Hitch, Checking And Cleaning If Necessary: Procedure

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Check the surfaces -arrows- on the ball head mount for corrosion.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If there is corrosion on the surfaces, scrape it off with a three sided scraper then clean the surface with silicone remover.

-- Apply a light coat of G 000 650 or G 000 150 paste to the cleaned surfaces.

-- Check the contact surfaces -arrows- on the ball head for corrosion.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If there is corrosion on the surfaces, scrape it off with a three sided scraper then clean the surface with silicone remover.

-- Apply a light coat of G 000 650 or G 000 150 paste to the cleaned surfaces.

-- Make sure the ball head fits correctly inside the mount. Refer to Checking .

-- Install the cap -1- into the ball head mount -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

If the cap is missing or damaged, a new one must be installed to prevent corrosion around the ball head mount.

-- Install the cover -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.