Overview - Selector Mechanism
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Move the selector lever into "P" and set the parking brake before working with the engine running.
- Shift Cover with Handle
- Do not remove the handle unnecessarily. Unclip only the cover for the emergency release. Refer to EMERGENCY RELEASE FROM P .
- Removing and Installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
- Selector Mechanism with Selector Lever Cable
- With integrated Selector Lever Sensor System Control Module -J587- with Selector Lever -E313-, Tiptronic Switch -F189-, Selector Lever Park Position Lock Switch -F319- and Shift Lock Solenoid -N110-
- Selector lever cable can only be replaced together with the selector mechanism. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Do not grease the selector lever cable.
- Removing and Installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Checking and Adjusting. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .
- Bolt
- 8 Nm
- For attaching the selector mechanism to the selector housing
- Quantity: 4
- Nut with Collar
- 8 Nm
- Quantity: 4
- Selector Housing
- Selector Lever Cable
- Must not be removed from the selector mechanism and is replaced together as a single component.
- Transmission