Windshield Wiper Motor, Replacing: Installing

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the connector to the Windshield Wiper Motor -V-.

-- Switch the ignition on.

-- Activate "one-touch wiping" and let the Windshield Wiper Motor -V- run into its end position.

-- Switch off the ignition.

-- Disconnect the connector.

-- Install the Windshield Wiper Motor -V- on the windshield wiper frame.

-- Install the bolts -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the motor crank -2- on the windshield wiper motor shaft.

-- Install the nut -1-.

-- Align the operating rod -4- and the motor crank -2- parallel.

-- Tighten the nut -1-.

-- Connect the operating rod -4- and motor crank -2- at the ball joint.

-- Install the Windshield Wiper Motor -V-. Refer to Windshield Wiper Motor -V-, REMOVING AND INSTALLING .