Plenum Chamber Cover, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
If the Windshield is Replaced
-- Remove the inset from the windshield retainer.
Continuation for All Vehicles
CAUTION:
Risk of damaging the windshield by striking the plenum chamber cover in the retainer.
Cracks in the windshield are possible.
- Never strike the plenum chamber cover or posh in using a tool.
- Press in the plenum chamber cover by hand using slight pressure in the retainer.
-- Spray the windshield retainer with soapy water to make it easier to install the plenum chamber cover.
-- Position and center the plenum chamber cover on the windshield retainer.
-- Starting at the outside, gently push the plenum chamber cover into the windshield retainer.