Calibration Device: VAS 721 001, INSTALLING AND ALIGNING: Installation
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Roll out the calibration pattern of the Calibration System:VAS 721 001 on the calibration area.
-- Attach the clamping strips on the edges of the calibration pattern.
- The arrows on the calibration patterns are facing towards the same direction (direction of travel of the vehicle)
-- Align the calibration patterns with a distance of -a- = 2000 to 2500 mm ± 5 mm parallel.
-- In order to centrally align the vehicle, it is helpful to place a center line in between the calibration patterns.
Crosshairs -1- on the calibration patterns show the position of the front axle of the vehicle.