Windshield Wiper Arms, Removing And Installing: Removing
-- Refer to Windshield Wiper, Bringing into Service Position .
-- Pry the caps -3- off the windshield wiper arms -1- with a suitable screwdriver.
-- Loosen the nuts -2- several turns.
CAUTION:
Risk of damaging the wiper arm.
- Only use the Puller - Wiper Arm Kit - Puller 2: T10369/2 .
-- Position the Puller - Wiper Arm Kit - Puller 2: T10369/2 -A- on the wiper arms -3-.
-- Position the thrust piece -2- on the wiper arm shafts.
-- Turn the bolts -1- clockwise until the windshield wiper arms -3- are removed from the wiper arm shafts.
-- Remove the Puller - Wiper Arm Kit - Puller 2: T10369/2 -A- from the wiper arms -3-.
-- Remove the nuts -4-.
-- Remove the wiper arms -3-.