Basic Height Adjustment
Special tools and workshop equipment required
- Socket 5 mm: T10570
The front bolt -5- can be adjusted a total of 11 turns, the rear bolt -3- a total of 16 turns. The center position is the base setting.
One turn = 1 mm adjustment.
Right turn = door window up, left turn = door window down.
New window regulators are delivered with the correct basic setting.
-- Move the door window -1- downward toward the basic setting.
-- Remove the caps from the underside of the door.
The : T10570 -6- can be used to turn the adjusting screw.
The tool -4- is inserted on the front window regulator rail at an angle of 9° -a- to approximately 277 mm -c-.
The tool -4- is inserted on the front window regulator rail at an angle of 6° -b- to approximately 237 mm -d-.
-- Screw in the front adjusting screws -3- all the way down.
-- Screw in the rear adjusting screws -5- all the way down.
-- Rotate the front adjusting screws -3- exactly five and a half turns upward.
-- Rotate the rear adjusting screws -5- exactly eight turns upward.
The center position is now reached. The basic adjustment is completed.