Front Door Window, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the inner window shaft seal -5- from the flange.
-- Pry out the caps with the : 3409 or remove the adhesive pads.
-- The clamping screws -2 and 4- for the door window can be accessed through the openings.
-- Loosen the bolts -2- but do not completely remove them. Press apart the clamping bracket.
-- Remove the bolt -4- completely.
-- Remove the door window upward -arrow- from the window shaft.
NOTE:
If it is not possible to do this because the window regulator motor is faulty, remove the motor.
Then the door window can be moved to the necessary position.