Refrigerant Line From Condenser To A/C Compressor, Removing And Installing: Removing
-- If equipped, remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Drain the refrigerant circuit. Refer to A/C SERVICE STATION, DISCHARGING .
Danger or frostbite due to refrigerant coming out under pressure.
Frostbite on the skin and other parts of the body is possible.
- Wear safety gloves.
- Wear protective eyewear.
- Extract refrigerant and open the refrigerant circuit immediately.
- If more than 10 minutes elapse after extracting the refrigerant and the refrigerant circuit was not opened, extract the refrigerant again. Evaporation can cause pressure to develop in the refrigerant circuit.
-- For all the following work, close the open lines and connections with clean plugs from the :VAS6122 .
-- Remove the bolts -2 and 3-.
-- Remove the refrigerant line -1-.