Overview - Door Components

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Front Door Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Front Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Adjusting. Refer to DOOR, ADJUSTING .
Inner Window Shaft Strip
- Removing and Installing. Refer to INNER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
Sticker
- Diameter 32 and 40 mm (1.26 and 1.57 in.)
- Use commercially available duct tape if needed
- The sticker must completely cover the openings.
Insulation
- Self-adhesive
- Installing:
  -- Cut to size if necessary, 250 mm (9.84 in.) x 160 mm (6.30 in.). Position as shown in the image.
  
  -- Warm up using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A and then press firmly onto the outer door panel.
Insulation
- Self-adhesive
- Installing:
  -- Cut to size if necessary, 200 mm (7.87 in.) x 100 mm (3.94 in.). Position as shown in the image. Distance 10 mm to the next damper.
  
  -- Warm up using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A and then press firmly onto the outer door panel.
Door Inner Cover
- Removing and Installing. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
- Always replace .
Outer Window Shaft Strip
- Removing and Installing. Refer to OUTER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
Sticker
- Quantity: 3
- 15 mm (0.59 in.) x 50 mm (1.97 in.)
- Use commercially available duct tape if needed
- The sticker must completely cover the openings.
Window Guide
- Removing and Installing. Refer to WINDOW GUIDE, REMOVING AND INSTALLING .