Rear Axle Toe, Adjusting

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench 1332 40-200Nm: VAG1332

-- Loosen the nut -1-.

Fig 1: Identifying Nut And Eccentric Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn the eccentric screw -2- until the specified value is reached.

NOTE:

The maximum adjustment range is 90° to left or right of center position.

-- Tighten the nut -1-.

-- After the nut -A- is tightened, check the toe value again. Refer to AXLE ALIGNMENT SPECIFIED VALUES .

Tightening Specifications

Refer to OVERVIEW - TRANSVERSE LINK