Fuel Pressure Sensor: Removing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove upper section of the intake manifold. Refer to UPPER INTAKE MANIFOLD .

-- Disconnect electronic connector from the fuel pressure sensor -G247- -4-.

-- Remove fuel pressure sensor -G247- -4-.

Fig 1: Component Location Under Intake Manifold Lower Section, Cylinder Bank 2 (Left)

Courtesy of AUDI OF AMERICA, LLC