Cover Profile, Adhering

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Windshield -1- with ceramic coating.

-- If cover profile is damaged, remove rest of profile completely using a glass scraper without damaging ceramic coating printed area.

-- Clean adhesion area with Cleaning Solution -D 009 041 04-.

-- Now apply a marking at uniform distance -a- = 8 mm to top of window edge.

Fig 1: Identifying Cover Profile, Windshield, And Adhesive Tape

Courtesy of AUDI OF AMERICA, LLC

-- Apply Primer -D 009 200 02- cleanly up to marking.

-- Allow primer to air dry for at least 10 minutes.

-- Remove protective foil from double-sided adhesive tape -2- for side impact molding.

-- Place cover profile -3- onto window centered with rear edge to end of priming (marking).

-- Press on profile firmly onto window using a application roller.