Engine, Removing From Scissor Lift Table: Procedure: Notes
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Engine/transmission subassembly removed; engine and transmission separated. Refer to ENGINE AND TRANSMISSION, SEPARATING, AUDI S6/S7 .
- Engine secured with :VAS6131/13-7 .
-- Remove the upper rear coolant pipe. Refer to UPPER REAR COOLANT PIPE, REMOVING AND INSTALLING .
-- Engage the :3033 on the engine lifting eyes and on the shop crane as shown in the illustration.
-- Tension engine slightly with shop crane, do not raise.
-- Disconnect the left and right connectors -1 and 2-.