Common Specs & Procedures
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | WORKING WITH A/C SERVICE STATION (2 Of 2) or WORKING WITH A/C SERVICE STATION (1 Of 2) | ||
| Torque | Refer to the appropriate procedure in OVERVIEW - A/C COMPRESSOR POWER UNIT | ||
| Axle Nut/Hub Nut/Wheel Bearing Unit Bolt | |||
| Front | 200 Nm + 90° | ||
| Rear | Refer to the appropriate procedure in OVERVIEW - WHEEL BEARING | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | HYDRAULIC SYSTEM | ||
| Disc Brakes | FRONT BRAKES REAR BRAKES |
||
| Torque | Refer to the appropriate procedure in HYDRAULIC SYSTEM Refer to the appropriate procedure in MECHANICAL COMPONENTS |
||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | Refer to the appropriate procedure in OVERVIEW - GENERATOR | ||
| Drive Belts | |||
| Adjustment | |||
| CXBA, CXBB | RIBBED BELT, REMOVING AND INSTALLING | ||
| DGXA | RIBBED BELT, REMOVING AND INSTALLING | ||
| Belt Routing | |||
| CXBA, CXBB | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| DGXA | Refer to the appropriate procedure in OVERVIEW - RIBBED BELT DRIVE | ||
| Engine Cooling | |||
| General Service Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | ||
| Radiator Cap Pressure | |||
| CXBA, CXBB | Pressure Relief Valve in Cap, Checking | ||
| DGXA | Pressure Relief Valve in Cap, Checking | ||
| Thermostat R & I | COOLANT THERMOSTAT, REMOVING AND INSTALLING (DGXA) | ||
| Water Pump R & I | |||
| CXBA, CXBB | COOLANT PUMP/THERMOSTAT | ||
| DGXA | COOLANT PUMP/COOLANT REGULATION | ||
| Engine Mechanical | |||
| For Engine(s): CXBA, CXBB | |||
| Compression | COMPRESSION PRESSURE, CHECKING | ||
| Oil Pressure | Refer to the appropriate procedure in OIL PRESSURE, CHECKING | ||
| Overhaul | Refer to the appropriate procedure in ENGINE ASSEMBLY or CRANKSHAFT, CYLINDER BLOCK or CYLINDER HEAD, VALVETRAIN | ||
| Torque | Refer to the appropriate procedure in ENGINE ASSEMBLY or CRANKSHAFT, CYLINDER BLOCK or CYLINDER HEAD, VALVETRAIN | ||
| For Engine(s): DGXA | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | Refer to the appropriate procedure in OIL PRESSURE, CHECKING | ||
| Overhaul | Refer to the appropriate procedure in ENGINE ASSEMBLY or CRANKSHAFT, CYLINDER BLOCK or CYLINDER HEAD, VALVETRAIN | ||
| Torque | Refer to the appropriate procedure in ENGINE ASSEMBLY or CRANKSHAFT, CYLINDER BLOCK or CYLINDER HEAD, VALVETRAIN | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Engine Oil Drain Plug | 30Nm | ||
| Flywheel/Flex Plate Torque | 60 Nm +90° | ||
| Fuel System | |||
| Pressure Specification | Specified value: 4.0 to 7.0 bar (58.01 to 101.52 psi) | ||
| Fuel Pressure Test Procedure | TRANSFER FUEL PUMP -G6-, CHECKING | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug | 06K 905 601 D | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | Refer to the appropriate procedure in OVERVIEW - STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | AXLE ALIGNMENT SPECIFIED VALUES | ||
| Torque | N/A | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||