Overview - EVAP System, Without Fuel Tank Leak Detection
- EVAP Canister
- Versions with lower line connections
- Component location: under the wheel housing liner inside right rear wheel housing
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- EVAP Canister
- Versions with upper and lower line connections
- Component location: under the wheel housing liner inside right rear wheel housing
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- Bleeder Line
- To the EVAP Canister Purge Regulator Valve 1 -N80-
- Clipped in the fuel tank
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- To disconnect, press the release button on the connecting piece
- The connector couplings must audibly engage.
- Pull on the connector couplings to check them for secure fit.
- Open the quick-release coupling. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- On connection -T-
- Bleeder Line
- From the fuel tank
- To disconnect, press the release button on the connecting piece
- The connector couplings must audibly engage.
- Pull on the connector couplings to check them for secure fit.
- Open the quick-release coupling. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- On connection -M-
- Cap
- On vent connection -A-
- Bolt
- 20 Nm
- -A- Vent Connection
- -T- Connection to Fuel Tank
- -M- to EVAP Canister Purge Regulator Valve 1 -N80-
- Cap