Digital Sound System Control Module -J525-, Removing And Installing, DYNAUDIO Or Fender Sound System: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Golf SportWagen, 2017 Volkswagen Golf Alltrack, 2016 Volkswagen Golf SportWagen, and 2015 Volkswagen Golf SportWagen. However, it is still accessible from the selected car via links, so may be relevant.

-- Raise the front seat to the highest position and then to the rearmost position.

-- Turn off the ignition and all electrical equipment.

-- Then remove the ignition key, if equipped.

-- Remove the expanding rivets -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide the cover -1- evenly in the direction of travel and remove it.

-- Release and disconnect the connector -3- from the Digital Sound System Control Module -J525- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9 -1- onto the MOST bus connector -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release and disconnect the connector -4- from the Digital Sound System Control Module -J525- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the screws -2-.

-- Pivot the Digital Sound System Control Module -J525- -1- out of the bracket.