Information Electronics Control Module 1 -J794-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen Golf SportWagen, 2017 Volkswagen Golf Alltrack, 2016 Volkswagen Golf SportWagen, and 2015 Volkswagen Golf SportWagen. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment.

-- Then remove the ignition key, if equipped.

-- Open the glove compartment.

-- Remove any data storage device still in the Information Electronics Control Module 1 -J794-.

-- Insert the two clips from the Radio Removal Tool:T10057 into the slits in the Information Electronics Control Module 1 -J794- -1- until they lock into place.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The points on grip eyes must face outward.

-- Remove the Information Electronics Control Module 1 -J794- -1- from the glove compartment at the Radio Removal Tool:T10057 grip eyes.

-- Release and disconnect the connectors from the Information Electronics Control Module 1 -J794- -1-.

Equipment Levels with the Digital Sound System Control Module -J525-

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9 -1- onto the MOST bus connector -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

All Equipment Levels

-- Press the locking tabs on the Information Electronics Control Module 1 -J794- and remove the Radio Removal Tool:T10057 .