Catch, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification. Refer to DOOR LOCK .
Installation is performed in the reverse order of removal:
NOTE:
The striker pin backing must be position with the pins -arrows- exactly in the hole.
The striker pins must be sheared off cleanly after sliding the striker pin.
If a new part is being installed, then remove the sheared off pins from the striker pin.
-- Striker Pin, Adjusting, refer to STRIKER PIN, ADJUSTING .