Battery Charge With ODIS, Checking

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the vehicle diagnostic tester. Refer to Vehicle Diagnostic Tester, CONNECTING .

-- Select Diagnosis operating mode and start diagnosis.

-- Select the VIN.

-- Remove V and press Accept to deselect "Work with guided fault finding".

-- Continue following the program procedure.

NOTE:

Observe directions and test conditions.

-- Select Special functions tab.

-- Select "A - Battery, Test" program and start with Perfrom test... .

-- Select type of battery test based upon the service.

-- Continue following the program procedure.

NOTE:

This will be followed by some questions and preparatory battery test work procedures.

After confirming the visual inspection, the results of the condition check will be displayed.

-- Send the diagnostic protocol online.

NOTE:

If tester display shows charge or replace battery, refer to BATTERY, REMOVING AND INSTALLING .