Fastener Tightening Specifications
WARNING: This page is about a different car, the 2013 Audi A8 and 2012 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Bolt Size | Nm |
|---|---|---|
| After-run coolant pump bolt | - | 9 |
| Bracket for the coolant auxiliary cooler bolt | - | 9 |
| Coolant pump bolt | - | 10 |
| Engine coolant temperature sensor bolt1 | - | 4 + 45° |
| Cover for the thermostat housing bolt | - | 9 |
| Fan shroud to coolant fan bolt | - | 3.5 |
| Fan wheel to coolant fan bolt | - | 5 |
| Housing for thermostat bolt 1 | - | 20 |
| Left rear coolant pipe bolt | - | 9 |
| Lower left coolant pipe bolt | - | 9 |
| Mounting pins for engine cover bolt | - | 4.5 |
| Radiator bolt | - | 3.5 |
| Ribbed belt pulley bolt | - | 8 |
| Right coolant pipes bolt 2 | ||
| - Bolt | - | 9 |
| - Bolt | - | 20 |
| Right rear coolant pipe bolt | - | 9 |
| Right front coolant pipe bolt | - | 9 |
| Right coolant pipe on the right side of the transmission 3 | ||
| - Bolt | - | 9 |
| - Bolt | - | 23 |
| Rubber buffer to radiator bolt | - | 3.5 |
| Upper left coolant pipe bolt | - | 9 |
|
||