ATF Circuit Overview: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Danger of causing damage to the transmission.
- Remove all the plugs on the ATF pipes and on the transmission that were installed during removal.
- The ATF cooling function will not work and the transmission will be damaged if the plugs are forgotten.
ATF Cooler, ATF Line
- Clip
- Replace bent or stretched circlips.
- ATF Cooler
- Removing and installing, refer to ATF COOLER, REMOVING AND INSTALLING
- Bolt
- 8 Nm
- Clip
- Replace bent or stretched circlips.
- O-Ring
- Replace
- Coat with ATF before installing
- ATF Pipe
- Cleaning, refer to Clean .
- Install all the way by hand with a new O-ring.
- Bolt
- 20 Nm
- First insert the ATF pipes with new O-rings by hand as far as the stop
- The retaining tab on the lower ATF pipe must lie on the transmission threads
- The retaining tab on the upper ATF pipe must touch the lower one.
- Bolt
- 8 Nm
- O-Ring
- Replace
- Coat with ATF before installing
- ATF Pipe
- Cleaning, refer to Clean .
- Install all the way by hand with a new O-ring.
- Bolt
- 8 Nm